- Basic
- Standard Compliant Channels
- $50
- Completely synergize resource taxing relationships via premier market
- 1 GB of space
- Support at $25/hour
- Sign Up
- Premium
- Standard Compliant Channels
- $100
- Completely synergize resource taxing relationships via premier market
- 10 GB of space
- Support at $15/hour
- Sign Up
- Platinum
- Standard Compliant Channels
- $250
- Completely synergize resource taxing relationships via premier market
- 30 GB of space
- Support at $5/hour
- Sign Up
Series ECMT200 Carbon Monoxide Transmitter
Series ECMT200, Carbon Monoxide Transmitter provides a field selectable current or voltage output that is proportional to the gas concentration in underground parking garages, vehicle maintenance facilities or mechanical rooms. Measurement range is upto 200 ppm. A field replaceable electrochemical sensor provides accurate readings upto 4 years.
Product Applications:
- Garage Ventilation
- Mechanical room monitoring
- Sensor: Field replaceable electrochemical, 4 year typical lifespan. Range: 0 to 200 ppm.
- Output Drift: <5% per year in air.
- Coverage Area: 5000 to 7000 sq. ft. typical.
- Accuracy: ±2% of reading at the time of calibration.
- Temperature Limits: -4 to 122°F (-20 to 50°C).
- Storage Temperature: For best sensor life, 32 to 68°F (0 to 20°C). Humidity Limits: 15 to 90% RH constant; 0 to 99% RH intermittent. Response Time: <45 seconds to 90% of final value.
- Calibration: 15 turn span and zero adjustment potentiometers. Housing: UV resistant polycarbonate.
- Output: Jumper selectable 4 to 20 mA (loop powered) or 2 to 10 V (load must be >50 KQ).
- Power Requirements:
- Current Output: 18 to 28 VDC;
- Voltage Output: 18 to 28 VDC/VAC, reverse polarity protected.
- Electrical Connection: Removable terminal block, includes two PG11and one PG 16 knockouts for conduit fitting.
- Weight: 0.28 lb (0.11 kg)
Published in
AEROSENSE CARBON MONOXIDE TRANSMITTERS
Download attachments:
Series CMT-100 Carbon Monoxide Transmitter
Series CMT-100, Carbon Monoxide Transmitter designed to detect Carbon Monoxide gas in air with analog and RS-485 MODBUS output. Measurement range is upto 250 ppm and optional 300 ppm is available. It is 3-wired supporting and gives current, voltage and RS-485 MODBUS output.
Product Applications:
- Garage Ventilation
- Vehicle maintenance facility.
- Pre-Calibrated
- Convenient use with varying voltage application.
- Easily installed at a low cost when used with exclusive case Semiconductor use to measure CO levels.
- Provides output signal proportional to CO level Model available to interact with other Devices Optimum for parking lot, tunnel & under Ground places
- General Performance
- Operating Temperature: -10 to 50°C
- Operating Humidity: 10-95% RH (Non-Condensing)
- Storage Temperature: -30 to 60°C
- Storage Humidity: 0-95% RH (Non-Condensing)
- Operating Environment:
- Residential
- Commercial spaces
- CO Measurement
- Sensing Method
- Semiconductor
- Measurement range: 0-250 PPM
- Coverage Area: 4000 to 6000 sq. ft. typical
- Accuracy:
- @23°C, 50% RH
- 0-100 ppm: +10% FS
- 100-250 ppm: +10% FS
- Response Time: Within 5 minutes
- Warm - up time: 2 hours
- Electrical Data
- Power Input: 24VAC
- Output Signal
- Voltage Output: 2-10 VDC
- Current Output: 4-20 mA
Published in
AEROSENSE CARBON MONOXIDE TRANSMITTERS
Download attachments: